產品詳情

2.5A帶動態路徑管理的單節鋰電開關型充電器ETA6003Q3Q，科瑞芯深圳熱銷中

        ETA6003 is a switching Li-Ion battery charger with dynamic power-path control and input current limiting. When a battery is connected, depending on the battery voltage, the DC-DC switching regulator either pre-conditions, fast-charges the battery or just regulates a system voltage (VSYS) to a preset voltage. It does not require an external sense resistor for current sensing. The charging current is determined by programming ISET1 or ISET2 pin, depending on the state of the USB_DET. If USB_DET is low, indicating a valid AC adapter input is present, the charge current is set by ISET1; otherwise, it is set by ISET2. When the battery voltage reaches the termination voltage i.e. 4.2V, the charging path disconnects SYS to BATT. The ETA6003 also includes a dynamic power path when the SYS load current exceeds current limit of the DCDC regulator internally set, the SYS voltage falls below VBATT, ETA6003 turns on the power-path to supplement the system load through the battery.

產品型號：ETA6003

封裝：QFN3X3-16

產品應用：平板電腦、智能手機、移動電源、其他含大容量鋰電池的電子設備

產品特性：

• 輸入電壓達6.5V

• 2.5A充電電流

• 動態路徑管理

• 輸入維持電壓4.5V

• 電池充電截止電壓4.2V

• 兩級充電電流設定

• 無需毫歐級精密電阻

• 高達95%的轉換效率

• 3MHz開關頻率

• 空載待機電流70uA